Huawei FusionPower6000 Maintenance Manual page 53

FusionPower6000
Maintenance Guide
Step 5 Remove the WiFi module and antenna from the ECC800-Pro.
Step 6 Remove the ECC800 Pro.
Figure 6-5 Removing an ECC800-Pro
Step 7 (Optional) Remove the SIM card and install it in the corresponding slot of the new
ECC800-Pro main control module.
1.
2.
3.
Issue 02 (2022-07-18)
Loosen the screws on both sides of the old ECC800-Pro main control module
and pull the handles on both sides of the ECC800-Pro main control module to
remove the main control module.
Figure 6-6 Removing the ECC800-Pro main control module
Remove the SIM card from the corresponding slot of the old ECC800-Pro main
control module.
Install the removed SIM card in the corresponding slot of the new ECC800-Pro
main control module.
Figure 6-7 Installing a SIM card
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Component Replacement
46