Setting Management System Parameters; Setting Neteco Parameters - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
----End

7.8.6 Setting Management System Parameters

7.8.6.1 Setting NetEco Parameters

Procedure
Step 1 Apply for a fixed IP address or management system domain name/DNS server
address from the network administrator of the equipment room.
Step 2 Set ECC800-Pro communications parameters.
●
●
Issue 02 (2022-07-18)
NO TE
– After the first login, change the preset password in time to ensure system access
security.
– A password that has been used for a long time is more likely to be stolen or cracked.
The risk increases over time. Change the password once every three months.
– It is recommended that you use different user accounts to log in to the ECC800-Pro
WebUI and app concurrently. Otherwise, either of them will be logged out.
(WAN port networking) On the ECC800-Pro WebUI, set the IP address, subnet
mask, and default gateway, and click Submit.
Table 7-7 IP parameters
Path
System Settings
> System
Parameters >
Monitor IP >
WAN_n
(4G networking) Set mobile data parameters on the ECC800-Pro WebUI.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Parameter Default Value
IP address – WAN_1:
– WAN_2:
Subnet mask 255.255.255.0
Default gateway – WAN_1:
– WAN_2:
Setting
Set this
192.168.8.10 parameter based
on the IP address
assigned by the
192.168.0.10
network
administrator.
Set this
parameter based
on the subnet
mask assigned
by the network
administrator.
Set this
192.168.8.1 parameter based
on the default
gateway address
192.168.0.1
assigned by the
network
administrator.
7 FAQ
104