Huawei FusionPower6000 Maintenance Manual page 100

FusionPower6000
Maintenance Guide
Step 5 Log in to the ECC800-Pro WebUI.
1.
2.
3.
----End
Issue 02 (2022-07-18)
NO TE
When switching between different versions of the ECC800-Pro on your PC, you are
advised to clear the historical Internet Explorer cache. Failing to do so may cause some
information missed or exception after login. The following provides the details:
1. Open Internet Explorer and choose Tools > Internet Options > General.
2. Select Delete browsing history on exit and click Delete.
3. In the Delete Browsing History dialog box, select all options except Password,
and click Delete.
monitoring IP address (such as https://192.168.8.10) in the
Enter https://
address box of the browser, and then press Enter to access the WebUI login
page.
Figure 7-16 WebUI login page
On the login page, enter the user name and password, and select a language.
– Preset user name: admin
– Preset password: Changeme
Click Log In.
NO TE
– After the first login, change the login password as prompted.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notification is configured and the password retrieval mode is
configured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 FAQ
93