FusionPower6000
Maintenance Guide
1.4 Mechanical Safety
When pulling equipment out of a cabinet, be aware of unstable or heavy objects
in the cabinet to prevent injury.
General Requirements
●
●
Hoisting
●
●
●
●
●
●
Issue 02 (2022-07-18)
WARNING
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for an extended period of time.
Before installation, ensure that the equipment is firmly anchored to the floor
or other solid objects, such as a wall or an installation rack.
Do not walk under hoisted objects.
Only trained and qualified personnel should perform hoisting operations.
Check that hoisting tools are available and in good condition.
Before hoisting objects, ensure that hoisting tools are firmly secured onto a
load-bearing object or wall.
Ensure that the angle formed by two hoisting cables is no more than 90
degrees, as shown in the following figure.
Do not drag steel ropes and hoisting tools or bump hoisted objects against
hard objects during hoisting.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
14