Networking Commissioning; Preparations And Webui Login - Huawei FusionPower6000 Maintenance Manual

Hide thumbs Also See for FusionPower6000:
Table of Contents

Advertisement

FusionPower6000
Maintenance Guide
Step 9 Tap Paral. Inv. ON on the LCD screen Common Functions. The system transfers
to inverter mode.
Step 10 Connect batteries to the parallel system.
1.
2.
3.
4.
Step 11 Turn on the general output switch (general load switch).
----End

7.8 Networking Commissioning

7.8.1 Preparations and WebUI Login

Prerequisites
Procedure
Step 1 Connect a straight-through cable between the PC network port and the WAN1
port (protected by a security mechanism) on the ECC800-Pro.
Issue 02 (2022-07-18)
Check that no alarm except the No battery alarm is displayed on the LCD of
each UPS.
Turn on the battery input switch for each UPS. (If there are multiple battery
strings, turn on the switch of each battery string first, and then turn on the
general switch between the battery strings and the UPS.)
Use a multimeter to measure the voltage where the battery switch is located
(if there are multiple battery strings, use a multimeter to measure the voltage
where each battery switch is located, and then measure the voltage where the
general battery switch is located).
CA UTION
Exercise caution when performing operations with power on.
Ensure that batteries are properly connected (the No battery alarm in the
active alarm list of all LCDs disappears within 2 minutes and no other alarms
are generated).
NO TE
● In a parallel system, it is recommended that all racks have the same capacity. When the
system is unloaded, the load rate is displayed on the LCD of the UPS that starts first.
The load rate is not displayed after all UPSs start.
● If you connect UPSs in parallel for the first time, perform all the preceding steps. If you
need to restart the inverters after the parallel system powers off or if the parallel system
needs to transfer from bypass mode to inverter mode, you only need to tap Paral. Inv.
ON on the LCD screen Common Functions.
Supported operating system: Windows 7 and later versions
It is recommended that the screen resolution be 1366 x 768 or higher.
Browser: Chrome, Firefox 32, Internet Explorer 11 or later
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 FAQ
90

Advertisement

Table of Contents
loading

Table of Contents