Initial Startup - Huawei UPS5000-E-FM User Manual

UPS5000-E-(30 kVA-120 kVA)-FM
User Manual

4.1.2 Initial Startup

If the equipment is started for the first time, obtain authorization for the
equipment and set related parameters on the Settings Wizard screen. If the
equipment is not started for the first time, skip this section.
Procedure
Step 1 Obtain the startup password through the app. After the application is approved,
enter the password on the service authorization screen of the device to complete
device authorization.
Technical support engineers can obtain the service authorization code through the
app. For details, see the
Step 2 If the software version is incompatible, activate the software version as instructed
on the LCD.
Step 3 Set the language, time and date, network parameters, system parameters, and
battery parameters on the Settings Wizard screen.
Set system parameters with caution. Incorrect setting may affect the normal UPS
operation.
● Set Single/Parallel after double check. Incorrect settings may affect the normal
● Output voltage level refers to the line voltage level. Set it based on site
● Set Output frequency correctly. Otherwise, loads may be affected and the UPS
● Set all battery parameters correctly based on site requirements. Battery
Issue 05 (2023-07-10)
NO TICE
NO TICE
NO TE
If you do not activate the software version as instructed, perform the following operations
to activate it:
● On the LCD, choose Maintenance > USB Operations > Upgrade Software > Details >
Activate to activate the software version.
● On the WebUI, choose Maintenance > System Upgrade > Activate All to activate the
software version.
NO TICE
UPS operation.
requirements.
may not work properly.
parameter settings are critical to battery maintenance, battery lifespan, and
UPS discharge time.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Data Center Facility Deployment Guide .
4 Single UPS Commissioning
101