Intelligent Display Module (Idm) - Basic Operations - GE PACSystems RXi User Manual

Chapter 3. Getting Started: Initial Power-up and Configuration

Intelligent Display Module (IDM) - Basic Operations

3.5
Although Proficy Machine Edition is required to create and download configuration and logic
to the RXi, you can perform many operations with the IDM. These include setting an initial IP
address, starting or stopping the RXi, and viewing and clearing fault tables. With the IDM, you
can perform many operations on the RXi Controller without the need for going online with the
programming software.
Drag down to view a list of
faults and access fault
details
Press to return to previous
View and clear Controller
and I/O fault tables
Set a temporary IP
address
View Rxi controller model
and version information
The use of IDM's Provide Password function allows entries that match the passwords defined
using Proficy Machine Edition.
32
View and change View model and version
display settings information for IDM
Passwords loaded to Flash cannot be cleared using the
Clear Flash command or by downloading new firmware. You
must document the password because it is not possible for
you to restore a unit to the default no-passwords condition.
PACSystems* RXi Distributed IO Controller User Manual
Press the RXi target to
access controller details
and settings
Caution
Set the Run/Stop
state
Clear all Controller
memory or clear
selected fault tables
Select sweep mode and
set communications
window times
Enter a password
GFK-2816F