Chapter 9. PROFINET IO-Controller Overview
PROFINET Networks for PACSystems
9.2
PROFINET is an open standard for industrial automation that is based on Industrial Ethernet.
The PROFINET IO framework allows the creation of I/O data exchanges between controllers
and distributed devices. It also allows configuration, parameterization, and diagnostics
communication between controllers and devices.
Note:
9.2.1
Basic System: One RXi Controller using a single port
Components of the RXi PROFINET network consist of a PACSystems RXi Controller
communicating with IO Devices on the PROFINET bus. IO Devices on the network can
include GE Intelligent Platforms PNS modules and a wide range of third-party devices. The
example below shows a basic system with one RXi Controller, and a PROFINET network
with GE Intelligent Platforms IO-Scanners and third-party IO-Devices.
An RXi Controller can control up to 128 devices. The PROFINET Scanners can interface
multiple devices such as discrete and analog modules to the PROFINET network.
198
The PNC operates only in autonegotiate mode. All PROFINET bus devices and
switches that are connected to the PNC should be configured to use autonegotiation.
PACSystems* RXi Distributed IO Controller User Manual
GFK-2816F