Chapter 3 Getting Started: Initial Power-Up And Configuration - GE PACSystems RXi User Manual

Chapter 3 Getting Started: Initial Power-up and Configuration

Before you attempt to power up the RXi Controller for the first time, inspect the unit for loose
or damaged components. If damage is observed (for example, in the form of bent component
leads or loose components), contact GE Intelligent Platforms for additional instructions.
Depending on the severity of the damage, it may be necessary to return the product to the
factory for repair.
Do not apply power to the unit if it has visible damage. Applying power to a unit with
damaged components may cause additional damage.
You will need the following:
■
Power supply and power cord. Refer to Section 2.4.2, Connecting the RXi Controller
Directly to 24Vdc Input Power for requirements.
Energy Pack kit, ICRXIACCEPK01A. Refer to the PACSystems RXi Energy Pack
ICRXIACCEPK01A Quick Start Guide, GFK-2835 for installation and operation.
■
Ethernet cables. Refer to Section 2.4.3, Connecting to the GbE Port for requirements.
■
Proficy Machine Edition software, version 7.50 or later
GFK-2816F
Chapter 3. Getting Started: Initial Power-up and Configuration
or
August 2015 27