Chapter 8. Gigabit Ethernet (GbE) Interface Overview and Operation
Error Status
(Hexadecimal)
AA90H
An attempt to establish a TCP connection with a Remote Server has failed. Check the following:
▪
▪
▪
AB90H
A COMMREQ was discarded because the application program issued the COMMREQ before the COMMREQ
Status Word for the previous COMMREQ was set.
AC90H
A protocol error occurred while communicating with the local controller.
AD90H
A TCP Timeout occurred while communicating with the Remote Controller.
AE90H
A protocol error occurred while communicating with the local Controller.
B490H
The channel that the application is trying to open is already open.
B590H
The channel the application is trying to access is owned by a different protocol.
B690H
COMMREQ specified an invalid Modbus function code.
B790H
COMMREQ specified an invalid Modbus unit ID.
B890H
COMMREQ specified an invalid number of subrequests.
B990H
A COMMREQ subrequest specified an invalid record number.
C090H
Reserved.
FF90H
Abort in progress on a channel
162
Make sure the Server is turned on.
Make sure cables are connected.
If using a switch, make sure the switch is turned on.
PACSystems* RXi Distributed IO Controller User Manual
Error Description
GFK-2816F