GE PACSystems RXi User Manual page 250

OPC UA Server – Service Request – CLEAR
This function clears the configuration files and certificates used by the OPC UA Server on the
controller.
Note: This request can only be successfully performed when the server is stopped.
Parameters for the CLEAR function service request are:
16#0001
16#0002
If the SVC_REQ does not pass power, the operation did not complete.
Example:
GFK-2816F
Parameter
OPC UA protocol
CLEAR request
Summary
IN
IN
August 2015
Chapter 13. OPC UA Server
Data Direction
(LD perspective)
237