Download Print this page

GE PACSystems RX3i Important Product Information

Energy pack
Hide thumbs Also See for PACSystems RX3i:

Advertisement

Quick Links

Important Product Information
For Public Disclosure
GFK-2724A
March 2018
Overview
The PACSystems
*
RX3i IC695ACC400 Energy Pack is intended for use with one of the
following RX3i CPUs: CPE302, CPE305 or CPE310. It is not compatible with any other CPUs.
In the event of loss of system power, the Energy Pack maintains power long enough for the
CPU to write its user memory contents to non-volatile storage (flash) memory.
The Energy Pack is mounted on the left side of an RX3i module and is connected to the CPU
using cable IC695CBL001. While the system is powered up, the Energy Pack charges from the
RX3i 24 Vdc rail via the I695CBL001 cable that connects the CPU to the Energy Pack,
The Energy Pack is compliant with EU RoHS Directive 2011/65/EU using the following
exemptions identified in the Annex: 7(a), 7(c)-I and III.
Related Documents
PACSystems RX7i, RX3i & RSTi-EP CPU Reference Manual, GFK-2222
PACSystems RX3i System Manual, GFK-2314
PACSystems Battery and Energy Pack Manual, GFK-2741
Additional documentation for PACSystems RX3i products is available on the Support
website: www.geautomation.com/support.
Ordering Information
Description
RX3i CPU Energy Pack
Energy Pack Cable, 3 ft. (0.91m) IC695CBL001
Energy Pack Specifications
Dimensions, including mounting brackets and latch
Operating temperature
For product standards, general operating specifications, and installation requirements for the RX3i system, refer to the
PACSystems RX3i System Manual, GFK-2314.
indicates a trademark of General Electric Company and/or its affiliates. All other trademarks are the property of their respective
*
owners.
Copyright © 2011-2018 General Electric Company.
Catalog Number
IC695ACC400
140mm (5.5") H x 124mm (4.87") D x 25.4mm (1") W
0 to 60°C (32°F to 140°F)
PACSystems* RX3i
IC695ACC400
Figure 1: ACC400
Energy Pack*
ACC400
CPU
Energy
Pack
Energy Pack

Advertisement

loading

Summary of Contents for GE PACSystems RX3i

  • Page 1 Pack PACSystems RX7i, RX3i & RSTi-EP CPU Reference Manual, GFK-2222 PACSystems RX3i System Manual, GFK-2314 PACSystems Battery and Energy Pack Manual, GFK-2741 Additional documentation for PACSystems RX3i products is available on the Support website: www.geautomation.com/support. Ordering Information Description Catalog Number...
  • Page 2 IC695ACC400 GFK-2724A Installation The Energy Pack is mounted on the left side of an RX3i module. To avoid taking up a backplane slot, it should be mounted on the module (usually a power supply) in slot 0 of the rack. It is connected to the CPU by cable IC695CBL001. Note that, when mounted on a module in slot 0, the Energy Pack will extend approximately 13mm (0.5") beyond the left side of the backplane.
  • Page 3 IC695ACC400 GFK-2724A Operation Note: When the Energy Pack is powered up for the first time, or is in a system that has been powered down long enough to completely discharge the Energy Pack, it may require a few seconds for it to charge to its operating level.