Standards Overview - GE PACSystems RXi User Manual

Appendix D. Product Certifications and Standards

Standards Overview

D.2
For environmental specifications, refer to Section 1.1.3, RXi Controller Environmental
Specifications.
EMC Emissions and Immunity Specifications
EMC Product Standards
Industrial Control
Equipment
Information Technology
Equipment
Generic Standards
EMC EMISSIONS
Emissions
EMC IMMUNITY
Electrostatic Discharge
RF Susceptibility
Fast Transient
Surge
Conducted RF Immunity
Damped Oscillatory Wave EN 61000-4-18
Product Safety
Ordinary Locations:
UL/CSA/EN/IEC 60950-1
UL508, CSA 22.2 No 142
20
EN 61000-4-x series of tests are technically equivalent to the IEC 61000-4-x series.
310
EN 61131-2
EN 55022
EN 55024
EN 61000-6-2
EN 61000-6-4
CISPR 11/EN 55011/
EN55016-2-3
FCC 47CFR15
CISPR 22/EN55022
20
EN61000-4-2
20
EN 61000-4-3
20
EN 61000-4-4
20
EN 61000-4-5
20
EN 61000-4-6
20
Requires: LPS or Class 2 power source, Pollution Degree 2 environment
Requires: LPS, Class 2, or LVLC power source, Pollution Degree 2
environment
PACSystems* RXi Distributed IO Controller User Manual
EMC Zone B requirements
Emissions
Immunity
Immunity
Emissions
30 – 1000 MHz, radiated, Group 1, Class A,
30 – 7500 MHz, radiated, Class A
30 – 6000 MHz, radiated, Class A,
Ethernet port: 0.15 – 30 MHz, conducted, Class A
8.0 kV air, 4.0 kV contact,
1kHz sine wave, 80% AM
10 V/m, 80 – 1000 MHz
3 V/m, 1.0 – 2.0 GHz
1 V/m, 2.0 – 2.7 GHz
DC Input: 2 kV, 33 nF direct
Ethernet port, shielded:
1.1 kV, capacitive clamp
RS-232 port, unshielded:
1.1 kV, capacitive clamp
DC Input: 0.5 kV, 12 ohms (CM); 0.5 kV,
2 ohms (DM)
Ethernet port, shielded: ±1.0 kV, 2 ohms (CM)
DC Input: 10 V, CDN
Ethernet port, shielded: 10 V, current clamp
RS-232 port, unshielded: 10 V, current clamp
DC Input: 2. 5kV, 1 MHz (CM/DM);
Ethernet port, shielded: 2.5 kV, 1 MHz (CM)
RS-232 port, unshielded: 2.5 kV, 1 MHz (CM)
GFK-2816F