Terminator; F Output1 Select; F Output2 Select - Unipulse F805AT-BC Operation Manual

6-3-5. Terminator

Use this menu item to select which terminator to use with RS-232C.
Operation
MODE
→
Options: CR, CR+LF
6-3-6. SI/F output1 select
Use this menu item to select the data 1 to send out via SI/F.
Operation
MODE
→
Options: BELT SPEED, WEIGHT DENSITY, FEED RATE, LOAD RATIO,
FEED RATIO, GROSS WEIGHT, TOTAL (UP. 4 DIG. ),
TOTAL (LO. 5 DIG. )
6-3-7. SI/F output2 select
Use this menu item to select the data 2 to send out via SI/F.
Operation
MODE
→
Options: BELT SPEED, WEIGHT DENSITY, FEED RATE, LOAD RATIO,
FEED RATIO, GROSS WEIGHT, TOTAL (UP. 4 DIG. ),
TOTAL (LO. 5 DIG. )
PAGE → COMMUNICATION
PAGE → COMMUNICATION
PAGE → COMMUNICATION
6.SETTING AND ADJUSTMENT OF READING
TERMINATOR
→
SIF OUTPUT1 SELECT
→
SIF OUTPUT2 SELECT
→
59