Master-Slave Functions - Unipulse F805AT-BC Operation Manual

1.FEATURES OF F805AT-BC (BELT SCALE TYPE)

1-3. Master-Slave Functions

Velocity detector
(rotary encoder)
Velocity detector
(rotary encoder)
As shown in the figures, two or more of F805AT-BCs can be configured to operate in a
master-slave mode, in which one F805AT-BC functions as a master and others as
slaves. The slaves operate following the target values and flow set by the master
device.
Up to eight F805AT-BCs can be connected to the same network, and they can be
grouped into four based on their IDs.
2
Feeder
Inverter, motor, or other devices
M
Weight detector (Load cell)
Weight signal
Velocity signal
Feeder
Inverter, motor, or other devices
M
Weight detector (Load cell)
Weight signal
Velocity signal
Target or flow value
Control signal
4-20mA
F805AT-BC Mathematical
calculation outputs
Master
Total pulse count
weight density
load ratio
Control signal
4-20mA
F805AT-BC Mathematical
calculation outputs
Slave
Total pulse count
weight density
load ratio
belt speed
feed rate
feed ratio etc.
belt speed
feed rate
feed ratio etc.