Interface; Graphics Display - Unipulse F805AT-BC Operation Manual

1.FEATURES OF F805AT-BC (BELT SCALE TYPE)

1-10. Interface

F805AT-BC provides variety of interfaces to communicate with external devices.
D/A converter / Output×2ch
or
Analog IN/OUT /Output×3ch (option)
Recorder etc.
RS-232C
Personal computer etc.
RS-485
(option)
PLC etc.
External I/O signal
PLC etc.
Pulse output
Feed rate, weight density, total, etc.
Accumulator etc.

1-11. Graphics Display

F805AT-BC provides two selectable display modes: bar graph and wave display.
Belt speed, weight density, feed rate, load ratio, and feed ratio can be displayed
simultaneously in a bar-graph display. The user can configure full-scale values for each
item.
F805AT-BC also provides a waveform display, in which input signals waveforms are
shown graphically. This mode can display belt speed, weight density, feed rate, load
ratio, feed ratio, and control rate.
4
D/A converter / Pulse input
or
Analog IN/OUT / Voltage input or current input or Pulse input (option)
SI/F
SI/FII
BCD OUT
BCD IN
(option)
Bar graph display
Printer Display
F805AT-BC F805AT-BC
Input waveform display
Speed input
(rotary encoder
etc.)
Data
converter
F805AT-BC