6.SETTING AND ADJUSTMENT OF READING
6-1-14. Total W. disp. digit
This parameter defines the unit for TOTAL W.DISP.DIGIT.
Operation
MODE
Options: 1g or 1kg, 10g or 10kg, 100g or 100kg, 1kg or 1t
6-1-15. Alarm time
Modifying the target value during operation can, depending the situation, bring about
large deviation and introduces variety of alarms (CONTROL DEVIAION over/under,
FLOW SETTING over/under, CONTROL LIMIT over). In this situation, ALARM
TIME can be used to specify the length of time during which these alarms are ignored.
After a target value modification, normal comparison operations will resume after the
ALARM TIME expires.
Operation
MODE
Input Range: 0 – 999 sec (3 digits, no decimal place)
50
→
OPERATION
→
PAGE
→
OPERATION
→ PAGE×2
→ TOTAL W DISP.DIGIT
→
ALARM TIME