Total ([Kg/H], [T/H]); Standard Feed Weight [Kg] - Unipulse F805AT-BC Operation Manual

10.ARITHMETICS

10-6. Total ([kg/h], [t/h])

Accumulated weight of material carried by the belt.
Total is updated in every 0.1 second.
Accumulation is allowed only while RUNNING. This calculation is disabled when
external input is selected in [OPERATION SELECT] and external signal is absent. If
internal input is selected, the calculation is performed when RUNNING is selected by
internal key.
Determine the moisture content

10-7. Standard Feed weight [kg]

Standard Feed Zero [kg]
Standard Feed Span [kg]
Belt length represent the length of the belt on which error measurement took place.
154
Total weight ([kg], [t])
＝ Total weight ([kg], [t]) ＋
Accumulate feed rate in real-time
Unit for feed rate and [TOTAL UNIT]?
Minimum unit for Total?
[FEED UNIT]
Moisture contained in the material?
Yes
[MOISTURE RATIO]
Capacity ［ kg］
＝
Weighing section ［ m］
Cal weight
＝
density ［ kg/m］
［kg/h］ 、
Feed rate
［t/h］
1
×
(3600×10)
Moisture ratio: Water content (%) in the material
Total
[TOTAL DISPLAY UNIT]
Set 00 to moisture ratio
[MOISTURE RATIO]
× Belt length ［ m］ × 1 －
× Belt length ［ m］ × 1 －
Moisture ratio ［ %］
－
100
No
Moisture ratio ［ %］
100
Moisture ratio ［%］
100