Initial Control Rate; Control Deviation - Unipulse F805AT-BC Operation Manual

10.ARITHMETICS
10-11. Initial Control Rate［％］
If [START COORDIN. VALUE] parameter is set to zero, the initial control rate is
calculated using set values from AT COORDINATE 1-4 and AT COORDIN OUT 1-4.
Initial control
rate
If [START COORDIN. VALUE] is set to non-zero value, the following relation holds:
Initial control rate [%] = start coordin. value [%]

10-12. Control Deviation

Ctrl. Deviation
156
Control rate [%]
c4
c3
c2
c1
0
f1
Feed rate ([kg/h], [t/h]) － Equivalent target ([kg/h], [t/h])
＝
Equivalent target ([kg/h], [t/h])
f1 - f4: AT COORDINATE 1-4
c1 - c4: AT COORDIN OUT 1-4
f2 f3 f4
Flow ([t/h], [kg/h])
Equivalent Target
× 100