Table of Contents
Advertisement
3.SCREEN LAYOUTS AND SETTINGS
3-2-2. Parameter setting
(Example 1) Setting by selecting displayed items:
1）Press one of the option buttons (
2）Check that the selected value appears on the top line.
3）Press
(Example 2) Setting by using numerical keypad:
To set DEAD BAND LOAD RATIO to 30%
1）Press［
2）Check that the correct value appears on the top line.
3）Press
Pressing
or
＋
allows negative range).
Pressing
decimal point position).
10
To select "16 times" for digital filter.
to confirm.
OK
and then
3
0
to confirm.
OK
clears all the input.
C
toggles the polarity of the number (effective only when the number
－
enters decimal point (effective only when the number allows arbitrary
・
Selected value
Options
in this case)
16 Times
Entered value
Ten-key numeric pad
］in the ten-key pad.
Advertisement
Table of Contents
