Marker Format; Searching With Markers; Cat Mode - Agilent Technologies FieldFox N9913A User Manual

Marker Format

The Marker Format setting, available ONLY in NA Mode, allows you to choose the
format of the marker readout that appears in the upper-right corner of the screen
and in the marker table. The marker format can be independent of the trace
format, and can be set independently for each trace. All markers on a trace have
the same marker format.
How to choose marker format
 Press Marker
 Then
 Then
 Then choose from the following:
To view other formats, change the trace format, then select Default. Learn how
to change format on page 42.

Searching with Markers

Marker Searches are used to move markers to locations on the trace which
exhibits the characteristics of the search criteria. Learn 'What is a Peak'' on page
156.
How to Search with Markers
The following menu structure applies to NA Mode. For keystroke information for
CAT Mode and SA Mode, see Hardkey/Softkey Menus on page 196.
 Activate the marker to be used for the search (NOT necessary with Bandwidth
 Then press Mrk ->/Tools.
 Then
Data Analysis Features
More
Marker Format
Selection
Default
Same as displayed format
R + jX
Complex impedance format
rd
(3 number is distance for Time Domain)
Z Magnitude
Impedance Mag.
Phase
Real
More
Imaginary
Mag & Phase
search.)
Marker Search
Example Y-axis value
22.8Ω -j61.4Ω
287.9fF
66.08Ω
73.8°
0.2003
-0.6727
0.705, -73.7°
153