Working With Batteries; Installing A Battery; Viewing The Battery Status - Agilent Technologies N9342C User Manual

2 Getting Started

Working with Batteries

The battery provides you approximately 3 hours of
operating time for your long time measurement in
field test.

Installing a Battery

Step
1 Open the battery cover
2 Insert the battery
3 Close the battery cover Push the cover closed, then

Viewing the Battery Status

Determine the battery status using either of the
following methods:
• Check the battery icon in the lower- right corner
of the front- panel screen: it indicates the
approximate level of charge.
• Press [System] > {System Info} > {Show System} >
{Page down} to check the current battery
information.
16
Notes
Use a phillips type screwdriver,
loosen the retaining screw, then
pull the battery cover open.
Observe correct battery polarity
orientation when installing.
re-fasten the cover with the
retaining screw.
N9342C/43C/44C User's Guide