Meaning Of The Leds On The Terminal Module Tm150 - Siemens SINAMICS G130 Operating Instructions Manual

4.2.4

Meaning of the LEDs on the Terminal Module TM150

Table 4- 5 Meaning of the LEDs on the Terminal Module TM150
LED Color
RDY -
Green
Orange
Red
Green/
Red
Green/
orange
or
red/
orange
Terminal Module 150 (TM150)
Operating Instructions, 04/2014, A5E03758735A
State Description
OFF The electronic power supply is missing or lies outside the
permissible tolerance range.
Continuous light The component is ready for operation and cyclic DRIVE-CLiQ
communication is taking place.
Continuous light DRIVE-CLiQ communication is being established.
Continuous light At least one fault is present in this component.
Note:
The LED is activated irrespective of whether the corresponding
messages have been reconfigured.
Flashing light Firmware is being downloaded.
0.5 Hz
Flashing light Firmware has been downloaded.
2 Hz Wait for POWER ON.
Flashing light Detection of the components via LED is activated (p0154).
2 Hz Note:
Both options depend on the LED status when module recognition
is activated via p0154 = 1.
Electrical installation
4.2 Interface description
23