Building A Proprietary Phonebook Directory - Multitech MultiVOIP MVP110 Quick Start Manual

Building a Proprietary Phonebook Directory

27. To build your proprietary Phone Directory (in an H.323
environment without the Gatekeeper option enabled), you
will first need to select the Proprietary Phonebook option
and then configure the "Master" MVP110 and then add the
"Slave" MultiVOIPs (or other H.323 endpoints).
Configuring the "Slave" MultiVOIPs is discussed later.
The first MVP110 to be configured is designated the
"Master" and contains the proprietary phonebook
database. All subsequent MVP110s added to the
proprietary phonebook database are designated "Slaves."
The master database contains the phone numbers of all
H.323 endpoints available for communication on an IP
network. This database is downloaded to each Slave
MVP110 as it comes online.
28. To configure the "Master" MVP 110, make certain that the
Proprietary Phonebook and Master options are enabled.
The Master IP Address, Send Status Report to Master,
and RAS Parameters group will be disabled.
Configuring the MultiVOIP
27