Set Security - Sun Microsystems SPARCstorage Library User Manual

2.3.8 Set Security

The security option allows you to prevent a user from inadvertently changing
important settings and operations.
Note – Security remains in effect after resetting the tape library.
When security is enabled, a user cannot access the following activities:
•
Changing the control mode
•
Changing the SCSI IDs
•
Changing the library serial number
•
Changing SCSI parity checking
•
Using the Diagnostics Menu and the Demo Menu
•
Using the Clean Drives Menu
•
Opening the front door (LCD security only)
If a user attempts to perform any of the these operations when security is
enabled, the tape library displays a message stating security is active.
To enable or disable security:
1. Select the Configuration Menu by pressing
2. Select Set Security On/Off by pressing
3. Select a three digit password.
To disable security, enter the same password used to turn security on.
a. Move from column to column by pressing
b. Change the password (default password is 000) by pressing
c. Press Enter to make the password active.
Note – If you forgot the password, enter the default password, 000.
SPARCstorage Library Menu Functions
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
← →
or .
2
↑ ↓
or .
2-11