Sun Microsystems SPARCstorage Library User Manual page 47

3. Select Move Cartridge by pressing
The system displays the following screen:
Set Source
↑ Increase
↓ Decrease
4. Select the element index of the cartridge slot from which you want the
CHM to pick the cartridge by pressing
The system displays the following screen:
Set Destination
↑ Increase
↓ Decrease
5. Select the element index of the cartridge slot from which you want the
CHM to place the cartridge by pressing
The CHM moves the cartridge from the source to the destination.
2.4.3.5 Scan Test
The Scan test scans the element where the bar code scanner is currently located
and the contents of the bar code label. The information is stored in the
cartridge inventory. Scan errors and the contents of labels are displayed on the
Label Information screen.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Scan by pressing
The element where the bar code scanner is currently located is scanned.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library Menu Functions
↓ ↑
or , then Enter.
0
↑ ↓,
or then Enter.
↑ ↓
or , then Enter.
↓ ↑
or
↓ ↑
or
↓ ↑
or , then Enter.
2
, then Enter.
, then Enter.
2-19