Sun Microsystems SPARCstorage Library User Manual page 52

2
2.4.3.13 Cycle Solenoid Test
2-24
4. Select the number of cycles (in increments of ten) you want the Cycle L
Axis test to run. Press
The test positions the CHM in front of the fixed cartridge slot and moves the
CHM back and forth on the long (vertical) axis the number of times you
specify.
To abort this diagnostic, press Escape and Enter.
The Cycle Solenoid test exercises the solenoid that controls the locking
mechanism on the front door.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Cycle Solenoid by pressing
The system displays the following screen:
Set Cycles
↑ Increase
↓ Decrease
4. Select the number of cycles, in increments of ten, (up to 250) you want the
Cycle Solenoid test to run by pressing
You will hear a clicking sound.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library X-Option Rack-mounted User's Guide—June 1995
↑ ↓
or , then Enter.
↓
or
↓
or
↓ ↑
or , then Enter.
10
↑ ↓
or , then Enter.
↑,
then Enter.
↑
, then Enter.