Sun Microsystems SPARCstorage Library User Manual page 63

4. Display information for each element index by pressing ↑ or ↓.
The following chart explains the element index information.
INX Displays the element index.
Addr (Address) Shows the SCSI address of this element.
Src (Source Shows the index of the last storage element from which the cartridge
Element Index) was moved.
O (Occupied) Indicates whether the tape library considers the specified element
location to contain a tape cartridge, as follows:
0 Element location does not contain a tape cartridge.
1 Element location contains a tape cartridge.
V (Occupied Indicates whether the Occupied flag is accurate.
Valid)
0 Occupied flag is questionable (may not be accurate).
1 Occupied flag is accurate.
P (Cartridge Indicates if a cartridge holder or tape drive is installed. If the element
Holder or Tape index references a storage element, this flag indicates whether the
Drive Present) holder is installed. If the element index references a tape drive, this
flag indicates whether that particular drive is installed.
The values for this flag are:
0 Not installed
1 Installed
A (Tape Drive Indicates whether a drive is empty, a cartridge is loaded in the drive,
Accessible) or the cartridge is ejected:
0 Cartridge may be loaded in the drive.
1 Drive is empty or the cartridge is ejected and ready to be picked.
SPARCstorage Library Menu Functions
2
2-35