Using The Operator Panel - Sun Microsystems SPARCstorage Library User Manual

Keypad Buttons on the Operator Panel
↑
↓
→
←
Help Goes to the Help screen
Escape No action
Enter Selects the item next to the arrow
Reset Goes to the reset screen

1.1.1 Using the Operator Panel

The Operator Panel enables you to do the following:
•
Monitor CHM functions, including cartridge movement and placement
while the tape library is operating in SCSI mode
•
Access a menu of operations for performing such tasks as setting the CHM
control mode and performing setup operations
•
Enable or disable LCD password security
•
Set SCSI IDs for the tape library and the two tape drives
•
View error messages for the tape library
•
Reset the tape library
Monitoring CHM Functions
The two bottom lines on the Main Screen of the LCD show an operational
status of the tape library. These status messages describe the CHM's
movements and placement procedures.
Accessing Menu Options
The Main Menu of the LCD includes 12 menu options.
To access the Main Menu:
Press Escape repeatedly from any other menu until this screen appears.
To see the other menu options:
Scroll down by pressing
Operating the SPARCstorage Library
Scrolls up
Scrolls down
Scrolls right
Scrolls left
↓
and scroll up by pressing
1
↑
.
1-3