Sun Microsystems SPARCstorage Library User Manual page 33

b. Push the square-shaped Eject button to the right of the LEDs on the
tape drive.
The tape unloads from the tape drive. The tape library ignores the fixed
slot in all sequential modes.
c. Close the door.
The following chart explains what each sequential mode does.
Sequential 1
Sequential 2
Dual Sequential
2. Press Escape until the Primary Menu is displayed.
3. Select the Interface Menu by pressing
4. Select the Control Mode Menu by pressing
5. Select Sequential 1, Sequential 2, or Dual Sequential mode by pressing
↑
or , then Enter.
The tape library performs the following actions when processing a cartridge:
1. Picks the first cartridge from the cartridge holder (the top cartridge).
If the CHM encounters an empty cartridge slot, it moves to the next
cartridge in the holder and picks it.
2. Places the cartridge in CTS 1 or CTS 2 (depending on the mode) and waits
until the CTS ejects the cartridge.
3. Retrieves the cartridge from the CTS and returns it to its original slot in the
holder.
4. Repeats the process with the next cartridge.
SPARCstorage Library Menu Functions
CHM picks cartridges from the holder sequentially and
processes them in Drive 1 (the top drive)
CHM picks cartridges from the holder sequentially and
processes them in Drive 2 (the bottom drive)
CHM picks cartridges from the holder sequentially and
processes them in Drive 1 and Drive 2.
↓ ↑
or , then Enter.
↓
or
2
↑
, then Enter.
2-5
↓