Sun Microsystems SPARCstorage Library User Manual page 50

2
2.4.3.10 Cycle Gripper Test
2-22
4. Select the element index of the cartridge slot from which you want the
CHM to pick and place the cartridge by pressing
The system displays this screen:
Set Cycles
↑ Increase
↓ Decrease
5. Select the number of cycles (in increments of ten) you want the Cycle
Pick/Place to run by pressing
The test picks a cartridge from the element you specify and places it back in
the same element.
To abort this diagnostic, press Escape and Enter.
The Cycle Gripper test opens and closes the gripper the number of times you
specify.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing Escape.
3. Select Cycle Gripper by pressing
The system displays the following screen:
Set Cycles
↑ Increase
↓ Decrease
4. Select the number of cycles (in increments of ten) you want the Cycle
Gripper test to run by pressing
The test closes and opens the gripper the number of times you specify.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library X-Option Rack-mounted User's Guide—June 1995
↑
or
10
↑ ↓
or , then Enter.
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
10
↑ ↓
or , then Enter.
↓
, then Enter.