Sun Microsystems SPARCstorage Library User Manual page 48

2
2.4.3.6 Scan With Range Test
2-20
The Scan With Range test scans a range of bar code labels and stores the
information in the cartridge inventory. Scan errors are displayed on the Label
Information screen.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Scan With Range by pressing
The system displays the following screen:
Set Scan Start
↑ Increase
↓ Decrease
4. Select the element index where you want the bar code scanner to begin
scanning by pressing
The system displays the following screen:
Set Scan Stop
↑ Increase
↓ Decrease
5. Select the element index (shown in the upper right corner) where you
want the bar code scanner to end scanning by pressing
The test scans a range of bar code labels and stores the information in the
cartridge inventory.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library X-Option Rack-mounted User's Guide—June 1995
↓
or
↓
or
↓ ↑
or , then Enter.
0
↑ ↓
or , then Enter.
0
↑
, then Enter.
↑
, then Enter.
↑ ↓
or , then Enter.