Unit Attention-Sense Key 6H; Table A-6 Unit Attention Sense Key (6H) Asc And Ascq Values - Sun Microsystems SPARCstorage Library User Manual

A
A.2.4 Unit Attention—Sense Key 6h
ASC ASCQ
Byte 12 Byte 13
28h 00h
28h 89h
28h 8Dh
28h 8Eh
29h 00h
2Ah 01h
3Fh 01h
A-12
The tape library does not stack Unit Attention conditions. The tape library
reports only the last Unit Attention condition when there are two or more Unit
Attention conditions. A Unit Attention condition remains in effect for a
particular initiator until that initiator clears it.
Table A-6 lists combinations of ASC and ASCQ values for the Unit Attention
sense key (6h).

Table A-6 Unit Attention Sense Key (6h) ASC and ASCQ Values

Description
The door was opened then closed.
The tape library was placed in SCSI Interface mode after operating in one of the
serial port modes.
The tape library was placed in SCSI Interface mode after operating in LCD mode.
The tape library was placed in SCSI Interface mode after operating in one of the
sequential modes (Sequential CTS1, Sequential CTS2, or Dual Sequential).
A power-on, SCSI bus reset, or device reset message occurred.
Mode parameters have been changed. Issue a MODE SENSE (1Ah) command to
determine what the new mode parameters are.
New microcode was loaded.
SPARCstorage Library X-Option Rack-mounted User's Guide—June 1995