Contents And Scopes Of Parameters - Smartgen HES7120-PV User Manual

6.2 CONTENTS AND SCOPES OF PARAMETERS

Items
No.
Busbar Setting
1 AC System
2
Rated Voltage
3
Rated Frequency
4 Normal Time
5
Abnormal Time
Voltage Transformer
6
(PT)
7
Over Voltage
8 Under Voltage
9
Over Frequency
10 Under Frequency
HES7120-PV Hybrid Engergy Controller
HES7120-PV HYBRID ENERGY CONTROLLER USER MANUAL
Table 12 Parameter Settings and Scope
Range Default
(0-3) 0
(30-30000)V 230
(10.0-75.0)Hz 50.0
(0-3600)s 10
(0-3600)s 5
(0-1) 0
(30-30000)V 100
(30-1000)V 100
(0-1) 1
(0-200.0)% 120.0
(0-200.0)% 116.0
(0-3600)s 5
(0-4) 0
(0-1) 1
(0-200.0)% 80.0
(0-200.0)% 84.0
(0-3600)s 5
(0-4) 0
(0-1) 0
(0-200.0)% 114.0
(0-200.0)% 110.0
(0-3600)s 5
(0-4) 0
(0-1) 0
(0-200.0)% 90.0
2020-05-20
Description
0：3P4W；
1：3P3W；
2：2P3W；
3：1P2W。
Provide standard for judging busbar
over/under voltage or not; if voltage
transformer is applied, this value is the
primary voltage of transformer.
Provide standard for judging busbar
over/under frequency or not.
The time from busbar abnormal to
normal.
The time from busbar normal to
abnormal.
0: Disabled; 1: Enabled
Primary voltage
Secondary voltage
0: Disabled; 1: Enabled
The setting value is rated voltage
percentage
The return value is rated voltage
percentage
Delay value
Action type
0: Disabled; 1: Enabled
The setting value is rated voltage
percentage
The return value is rated voltage
percentage
Delay value
Action type
0: Disabled; 1: Enabled
The setting value is rated frequency
percentage
The return value is rated frequency
percentage
Delay value
Action type
0: Disabled; 1: Enabled
The setting value is rated frequency
percentage
Version Page 31 of 59