Table of Contents
Advertisement
Return
Busbar setting
Timer setting
PV setting
PV control setting
Return
Start delay
Stop delay
Warming up time
Start time
Stop delay
000005s
Stop delay
000005s
NOTES:
a)
Please modify the internal parameters of the controller in standby state (such as programmable input, output port
configuration, various delays, etc.); otherwise, alarm shutdown or other abnormal phenomena may occur.
b)
The excessively high threshold must be greater than the excessively low threshold; for example, the overvoltage
threshold must be greater than the undervoltage threshold; otherwise, both overpressure and undervoltage will occur.
c)
The overfrequency threshold must be greater than the underfrequency threshold, otherwise both overfrequency
and underfrequency will occur.
d)
When setting the alarm, please set the return value correctly, otherwise the alarm will not work normally. When
setting too high warning, the return value should be less than the set value; When setting too low warning, the return
value should be greater than the set value.
e)
When starting successfully, the PV generator frequency should be set as low as possible so that the starter can
quickly separate when starting successfully.
f)
The programmable input port 1-7 cannot be set to the same item, otherwise the correct function cannot appear,
and the programmable input outlet 1-8 can be set to the same item.
4.4.3 LANGUAGE SELECTION
The display language of this selection interface is simplified Chinese, English and others; other
languages are English by default.
4.4.4 EVENT LOG
HES7120-PV Hybrid Engergy Controller
HES7120-PV HYBRID ENERGY CONTROLLER USER MANUAL
Table 1：
is used to change what needs to be set,
enter settings (Table 2),
Table 2：
is used to change what needs to be set,
enter settings (Table 2),
Table 3：
is used to enter settings (Table ),
step(Table 2).
Table 4：
is used to change the value on the cursor,
change the cursor position to the right or to the far right to
determine settings (Table 3)，
2020-05-20
is used to exit the settings.
back to last step(Table 1).
e
xit the settings
Version
Page 14 of 59
is used to
is used to
back to last
is used to
Advertisement
Table of Contents
