View And Acknowledge Status Alerts - Emerson Micro Motion 9739 MVD Configuration And Use Manual

Transmitter operation Configuration and Use Manual
June 2019 MMI-20016855

8.4 View and acknowledge status alerts

The transmitter posts status alerts whenever a process variable exceeds its defined limits or the transmitter
detects a fault condition. You can view active alerts, and you can acknowledge alerts. Acknowledging alerts is
not required.
8.4.1 View and acknowledge alerts using the display
You can view a list containing all alerts that are active, or inactive but unacknowledged.
Prerequisites
Operator access to the alert menu must be enabled (default setting). If operator access to the alert menu is
disabled, you must use another method to view or acknowledge status alerts.
Note
Only Fault and Informational alerts are listed. The transmitter automatically filters out alerts with Status Alert
Severity set to Ignore.
Procedure
See Figure 8-2.
112 Micro Motion 9739 MVD Transmitters