Installing An Antenna - Nexcom NISE 50 User Manual

Chapter 3: System Setup

Installing an Antenna

Note: Please remove the gaskets (ring 1 and ring 2) on the SMA
antenna jack first.
Ring 2 Ring 1
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
1. Remove the antenna hole cover located on the front panel.
Ring 2
Ring 1
2. Insert the SMA antenna jack end of the cable through the antenna hole,
and insert the 2 rings (ring 1 and ring 2) back to the antenna jack.
38
NISE 50 and NISE 50W User Manual