Nexcom NISE 50 User Manual page 72

Chapter 4: BIOS Setup
Serial Port Console Redirection
This section is used to configure serial port console redirection settings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
COM0
Console Redirection [Disabled]
► Console Redirection Settings
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
► Console Redirection Settings
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Console Redirection
Enables or disables the console redirection. When enabled, Console
Redirection Settings will be available.
Console Redirection (Serial Port for Out-of-Band Management)
Enables or disables the console redirection. When enabled, Console
Redirection Settings will be available.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
CPU Configuration
This section is used to configure the CPU.
Console Redirection Enable or
Disable.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Active Processors Cores
Select the number of cores to enable in each processor package.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater
than 3. The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid this problem, enable
this field to limit the return value to 3 or lesser than 3.
58
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
CPU Configuration
Socket 0 CPU Information

CPU Speed 1467 MHz
64-bit Supported
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Enabled]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Socket specific CPU Information
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 50 and NISE 50W User Manual