Nexcom NISE 50 User Manual page 71

Chapter 4: BIOS Setup
Serial Port 1 Configuration
This section is used to configure serial port 1.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3E8h; IRQ=11;
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
IT8528 H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Temperature (DTS)
Detects and displays the current CPU temperature.
System Temperature
Detects and displays the current system temperature.
VCore to VCC5
Detects and displays the output voltages.
57
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
PC Health Status
CPU temperature(DTS) : +44 C
System temperature : +33 C
VCore : +0.78 V
VCC12 : +11.99 V
VCC3 : +3.24 V
VCC5 : +4.95 V
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 50 and NISE 50W User Manual