Advanced Settings - Mitsubishi Electric AG-150A Instruction Book

7-12 Advanced settings

Advanced settings are required for a system with connection to an Expansion controller to which a high-level controller in addition to
AG-150A is connected. To make the advanced settings, touch [Initial settings]>[Advanced settings] from the menu bar on the setting
change screen.
* Some settings may not be accessible is logged in as a building manager user.
* Use the initial setting (Master) if only one high-level controller is connected.
Time Master/Sub
setting button
Comparison between Master and Sub
Clock setting
Clock synchronization
(1) To set the Master/Sub clock setting to "Master"
(2) Set the Master/Sub clock setting to "Sub."
Master setting
Allowed
Synchronized to the main controller
Press the Time Master/Sub setting to bring up "Master," and then
press Save Settings.
The initial setting is Master. Leave the setting as it is to set the unit to
"Master."
* Do not set more than one unit in a system to "Master."
Press the Time Master/Sub setting to bring up "Sub," and then press
Save Settings.
– 73 –
Sub setting
Not allowed
Synchronized to other controllers