Configuring Settings; Figure 41: Server Health Event Log; Table 6: Server Health (Event Log) Options - Intel Remote Management Module 3 User Manual

Intel® RMM3 Web Console Options
The following table lists the options available in this page:
Option
Event Log Category pull-down box
Event Log List
Clear Event Log button
7.3

Configuring Settings

The Configure settings page is used to configure the settings shown in Figure 42. By default, it
opens in the Network Settings window as shown in Figure 44.
WARNING
The RMM3 IP address must be on a different subnet than the baseboard IP address
used for management traffic.
48

Figure 41: Server Health Event Log

Table 6: Server Health (Event Log) Options

Select the type of events to display in the list
Selected sensors are shown with their name, status,
and readings. This includes a list of the events with
their ID, time stamp, sensor name, sensor type, and
description.
Click to clear the event logs.
Intel® Remote Management Module 3 User Guide
Task
Revision 1.3