Supported Verbs; Figure 64: Dnsendpt1 Target; Table 30: Dnsendpt1 - Supported Properties; Table 31: Dnsendpt1 - Supported Verbs - Intel Remote Management Module 3 User Manual

SMASH–Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide
Property
domainnamefromdhcp
dnsdomainname
serversfromdhcp
Identity

8.11.2 Supported Verbs

The supported verbs of the dnsendpt1 target are as follows:
Verb
cd
exit
help
show
version
76

Table 30: Dnsendpt1 - Supported Properties

Dhcp based DNS configuration. This property is a read only property.
This property gives the DNS Domain. This property is a read only property.
This property shows the servers dhcp. This is a read only property.
This read only property gives a brief explanation of the present target and
cannot be changed.

Table 31: Dnsendpt1 - Supported Verbs

change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
show all the targets, properties, and verbs supported by this target.
show the current version of SMASH*.

Figure 64: DNSENDPT1 Target

Task
Is used to
Revision 1.3