Account; Supported Properties; Figure 66: Remotesap2 Target; Table 36: Account - Supported Properties - Intel Remote Management Module 3 User Manual

Intel® Remote Management Module 3 User Guide
Verb
show
version

8.14 Account

The account target represents user accounts. It does not contain any targets.

8.14.1 Supported Properties

The supported properties of the target account are as follows:
Property
userid
username
ipmilanprivileges
password
Revision 1.3
(System Management Architecture for Server Hardware* by AMI*)
show all the targets, properties, and verbs supported by this target.
show the current version of SMASH*.

Figure 66: REMOTESAP2 Target

Table 36: Account - Supported Properties

This read only property defines the unique id for each user.
This property gives the user name of a particular account. This is settable
except for userid=1. Username Length must be more than 1 character and less
than 16 characters.
> set username=sdf
This property gives the ipmi LAN privileges. It can be set except for userid=1.
Only numbers are allowed.
> set ipmilanprivileges=4
This property gives the password of a particular user. It can be set except for
Is used to
Task
SMASH–Lite* Interface
79