Intel® Remote Management Module 3 User Guide
8.8
Lanendpt1
The target lanendpt1 gives information about LAN configuration. It contains the target:
Ipendpt1 - IP configuration.
8.8.1 Supported Properties
Following is the supported property of target lanendpt1:
Property
Identity
This read only property gives a brief explanation of the present target and cannot be changed.
8.8.2 Supported Verbs
The supported verbs of the lanendpt1 target are as follows:
Verb
cd
exit
help
Revision 1.3
(System Management Architecture for Server Hardware* by AMI*)
Figure 60: Enetport1 Target
Table 24: Lanendpt1 - Supported Properties
Table 25: Lanendpt1 - Supported Verbs
change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
Task
Is used to
SMASH–Lite* Interface
71