Table of Contents
Advertisement
Intel® Remote Management Module 3 User Guide
8.9.1 Supported Properties
The supported properties of the target ipendpt1 are as follows:
Property
ipaddress
The value of ipaddress is the IP address of the SP.
An IP address (Internet Protocol address) is a unique address that is used to identify
and communicate with each other on a computer network utilizing the Internet
Protocol standard (IP). This is an R/W property.
The value setting to the ipaddress affects the IP of the SP.
subnetmask
This is the value of the subnetmask of the SP. A subnetmask is a range of logical
addresses within the address space that is assigned to an organization. This is an
R/W property. The value setting to the ipaddress affects the IP of the SP.
usedhcp
Dynamic Host Configuration Protocol (DHCP) is a protocol used by networked devices
to obtain various parameters necessary for the networked devices to operate in an
Internet Protocol (IP) network. This property has two values (1 for DHCP and 0 for
Static). This is a R/W property.
committed
Once the ipaddress or subnetmask is set to 1, the property saves all the changes
made. In addition, the network settings also change and network connection is lost.
Identity
This read only property gives a brief explanation of the present target and cannot be
changed.
8.9.2 Supported Verbs
The supported verbs of the ipendpt1 target are as follows:
Verb
cd
exit
help
set
show
version
Revision 1.3
(System Management Architecture for Server Hardware* by AMI*)
Table 26: Ipendpt1 - Supported Properties
> set ipaddress=10.0.4.79
This will change the ipaddress of the sp. After changing, use committed property to
save.
> set subnetmask=255.255.248.0
This will change the subnetmask of the sp. After changing, use committed property
to save.
> set usedhcp=1
> Set committed=1
Table 27: Lanendpt1 - Supported Verbs
change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
set the r/w supported properties
show all the targets, properties, and verbs supported by this target.
show the current version of SMASH*.
Task
Is used to
SMASH–Lite* Interface
73
Advertisement
Table of Contents
