Sensor; Supported Properties; Figure 69: Record1 Target; Table 42: Sensor - Supported Properties - Intel Remote Management Module 3 User Manual

SMASH–Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide

8.17 Sensor

A typical server BMC would provide sensors for baseboard temperature, voltage, and chassis
intrusion monitoring. A sensor uses one type of energy, a signal of some sort, and converts it
into a reading for the purpose of information transfer. The sensor doesn't have any targets. All
properties of this target are read only properties.

8.17.1 Supported Properties

Property
Description
SystemCreationClassName
84

Figure 69: RECORD1 Target

Table 42: Sensor - Supported Properties

This read only property describes the sensor and the target under which it
is present.
This read only property gives the system creation class name and is a read
Task
Revision 1.3