Table of Contents
Advertisement
Intel® Remote Management Module 3 User Guide
Property
CurrentReading
BaseUnits
SystemName
CreationClassName
DeviceID
Name
SensorType
HealthState
OperationalStatus
Identity
8.17.2 Supported Verbs
The supported verbs of the sensor target are as follows:
Verb
cd
exit
help
show
version
Revision 1.3
(System Management Architecture for Server Hardware* by AMI*)
only property.
This read only property gives the current reading shown by the sensor
This read only property gives the units for the value given by current
reading property.
This read only property gives the target name under which this sensor
exists
This read only property gives the creation class name of the sensor.
This read only property gives the device ID.
This read only property gives the name of the current sensor.
This read only property gives the type of sensor.
This read only property gives the health status of the sensor.
This read only property defines the operational status of the sensor.
This read only property gives a brief explanation of the present target and
cannot be changed.
Table 43: Sensor - Supported Verbs
change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
show all the targets, properties, and verbs supported by this target.
show the current version of SMASH*.
Task
Is used to
SMASH–Lite* Interface
85
Advertisement
Table of Contents
