Installation On Intel ® Server Boards S5520Hc, S5520Bc, And S5520Sc - Intel Remote Management Module 3 User Manual

Hardware Installations and Initial Configuration
3.3.2 Installation on Intel
®
The Intel Server Boards S5520HC, S5520BC, and S5520SC install in pedestal style chassis.
1. Attach the Intel
2. Mount the bracket with the RMM3 module in a chassis slot near the baseboard
connector for the cable.
3. Attach the cable from the baseboard to the RMM3 module as shown.
4. Make a note of the MAC address of the Intel
the module (not the NIC). Keeping a record now may eliminate the need to reopen the
cover later.
5. Replace the chassis cover, attach AC power and connect a network cable to the Intel
RMM NIC
Figure 5: Installing Intel
12
Server Boards S5520HC, S5520BC, and S5520SC
®
® RMM3 to the connector on the server baseboard labeled "RMM".
®
RMM3 on Intel
Intel® Remote Management Module 3 User Guide
®
RMM3. It is written on a label attached to
®
Server Boards S5520HC, S5520BC, and S5520SC
®
Revision 1.3