Main Window; Figure 23: Remote Console - Intel Remote Management Module 3 User Manual

Table of Contents

Intel® Remote Management Module 3 User Guide

Note:



Java Run-Time Environment* (JRE*, version 6 update 10 or later) must be installed on

the client prior to the launch of a JNLP file.



The client browser must allow pop-up windows from the Intel

The Remote Console window is a Java Applet* that establishes TCP connections to the Intel

RMM3 module. The protocol that is used to run these connections is a unique KVM protocol and

not HTTP or HTTPS. This protocol uses ports #7578 for KVM, #5120 for CDROM media

redirection, and #5123 for Floppy/USB media redirection. Your local network environment must

permit these connections to be made, that is, your firewall and, in case you have a private

internal network, your NAT (Network Address Translation) settings have to be configured

accordingly.

6.2

Main Window

Starting the Remote Console opens an additional window as shown in Figure 24.

Revision 1.3

Remote Console (KVM) Operation

RMM3 IP address.

Table of Contents

Do you have a question about the Remote Management Module 3 and is the answer not in the manual?