Table of Contents
Advertisement
Intel® Remote Management Module 3 User Guide
8.12 Remotesap1
The remotesap1 target enumerates all the configurable IPs under the containing target. A
remote access server enables user access to those users who are not on a local network. This
does not contain any targets.
8.12.1 Supported Properties
The supported properties of the target remotesap1 are dnsserveraddress and identity.
Property
dnsserveraddress
Identity
8.12.2 Supported Verbs
The supported verbs of the remotesap1 target as follows:
Verb
cd
exit
help
set
show
version
The remotesap1 target enumerates all the configurable IPs under the containing target. A
remote access server enables users who are not on a local network to access. This does not
contain any targets.
Revision 1.3
(System Management Architecture for Server Hardware* by AMI*)
Table 32: Remotesap1 - Supported Properties
This property gives the dns server address. This is a R/W property. The value of
this property can be set as follows:
> set dnsserveraddress=0.0.0.0
This read only property gives a brief explanation of the present target and
cannot be changed.
Table 33: Remotesap1 - Supported Verbs
change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
set the r/w supported properties
show all the targets, properties, and verbs supported by this target.
show the current version of SMASH*.
Task
Is used to
SMASH–Lite* Interface
77
Advertisement
Table of Contents
